Features:
-When a laser beam works with a fabric, the edge of the fabric is melted and due to which it is possible to achieve a perfectly smooth edge without protruding threads, which cannot be done with ordinary scissors.
-The working is controlled by computer, avoiding error by human factor, has very high precision.
-Laser cutting of fabric with a high speeds of 50-1000mm/s. Some fabrics can be processed in several layers at the same time.
-The machine has many advantages, such as high cutting precision, low noise, automatic cutting with the auto feeder, can cut large and long materials.
-This machine is suitable for cutting roll fabrics. The machine is equipped with an automatic roll material feeding system, which completely excludes material going to the side, unnecessary unwinding or stretching of the material. With automatic feed conveyor and the roller feeding system, you can cut materials longer than the working area, so the cutting length is not limited.
-Using the software, you can select the required models, set cutting number and the size of the material, the program will lay out the workpiece. The program will also show the execution process and the amount of required material, show the layout of the parts on the desktop. This function is convenient for the operator to perform additional control over the parameters of cutting and nesting of parts, in addition, the display of the nest allows the operator to change or correct anything in the template proposed by the machine before starting cutting (add or remove parts, change the quantity, size or parameters).
-The machine is fully automatic, for the assembly of already processed parts, a basket is installed on the machine, and all the processed material can be collected into the basket. This allows less observation of the cutting process from the operator, so there is no need to constantly be near to the machine.
